This feature is available in the following product categories:

Manual Controls

Standard manual controls for our roller shades include:

Tensioned chain clutch system
- Pulley system to raise and lower
- Stainless steel beaded chain loop, tensioned
- Paired with 10lb, 20lb, or 24lb clutch determined by manufacturer based on size of shade and fabric selected
- Shades raise and lower smoothly, stop when chain is released
- Self-lubricating; never needs adjusting
- Default placement on right side; left placement available as option
Optional upgraded controls
- Crank control clutch system
  - Long crank arm for hard-to-reach areas or large installations
  - Paired with compact bi-directional gear assembly
  - Precise control, with minimal effort
  - Easily operate tall, wide, or heavy shades
  - Detachable crank by default; permanently attached crank available
- Coupled shade control
  - Adjacent shades are linked together
  - Easily operate multiple shades from a single controller
  - Ensures that all shades are lowered/raised to the same position for a consistent look
  - Contact us for assistance
- Cordless child-safe operation
- Motorized operation

Standard manual controls for our horizontal and vertical blinds, soft sheer shades, and cellular shades include:

Dual braided polyester lift cords
- Comes standard with most horizontal blinds, sheer shades, and cellular shades
- Pull on cords to raise or lower
- Pull to the side to secure in desired position
- Default placement on right side; left placement available as option
- Loose cord not suitable for areas where children are present
Tilt wand
- Comes standard with most horizontal blinds
- Rotate the wand to adjust angle of slats
- Some blinds use an separate cord for tilt instead of a wand
- Default placement on left side; right-side placement available as option
Tilt / traverse wand
- Comes standard with most vertical blinds
- Rotate the wand to adjust angle of slats
- Pull wand horizontally to open or stack blinds
- Some blinds use an separate cord for tilt instead of a wand
Optional upgraded controls
- Continuous braided polyester lift cord loop with tension device
- Cordless child-safe operation
- Motorized operation

Standard manual controls for our draperies:

Standard manual controls for our shutters:

Center-mounted tilt bar
- Comes standard with all shutters
- Central vertical rod adjusts the angle of louvers per shutter panel
Optional upgraded controls
- Manual tilt without center-mount tilt bar
- Gear-driven tilt operation
- Motorized operation

Note: The control operators shown here are samples. Actual control operator for your selected model may differ from these images.

Change Temporary Password